Search found 81 matches

by JimB
Tue Aug 22, 2017 11:53 am
Forum: Sport WS/HS
Topic: AOG Dead Screen AHRS
Replies: 3
Views: 6415

Re: AOG Dead Screen AHRS

Thanks Jeff.

I just looked at an old DEMO file that I decoded with GRT DeCode, and notice there is an internal temp column, but the data is all 0s. Is there a way to view internal temp from the DEMO file?

Jim
by JimB
Sun Aug 20, 2017 4:23 pm
Forum: Sport WS/HS
Topic: AOG Dead Screen AHRS
Replies: 3
Views: 6415

AOG Dead Screen AHRS

My PFD stopped working shortly after takeoff. First the bottom of the PFD turned black, then the entire display had lots of horizontal lines first white then yellow. Powered off and back on, no change. Diverted to nearby airport. While in route turned on vent fan since glareshield felt hot and a few...
by JimB
Wed Jul 19, 2017 3:19 pm
Forum: Nav/Com & Transponder
Topic: Altitude Encoding
Replies: 3
Views: 5567

Re: Altitude Encoding

Thanks Jeff and Bob. It looks like I will be fine as I have it configured.

This information would be useful in the GRT Equipment Supplements document. I had no idea that my GRT would have the accuracy to use the higher resolution setting in the ESG.

Jim Butcher
by JimB
Tue Jul 18, 2017 6:57 pm
Forum: Nav/Com & Transponder
Topic: Altitude Encoding
Replies: 3
Views: 5567

Altitude Encoding

I have had my Sport HS EFIS providing altitude information to my GNS430 and GTX327 using the Fuel/Air Data Z Format for many years. I have now replaced the GTX327 with an Appareo ESG transponder. It does not accept the Fuel/Air Data Z Format. I found that if I use the Trimble/Garmin encoding altimet...
by JimB
Mon Jul 10, 2017 4:22 pm
Forum: EIS Installation
Topic: EIS 6000, 12V Regulated, Multi-201B Option
Replies: 1
Views: 4579

Re: EIS 6000, 12V Regulated, Multi-201B Option

I am using that for two FlowScans and also two Hall effect current sensors with no problems.

Jim Butcher
by JimB
Thu Jun 15, 2017 11:16 am
Forum: ADS-B/Weather/Traffic
Topic: Stratux ADS-B Reeceiver
Replies: 40
Views: 59845

Re: Stratux ADS-B Reeceiver

Jeff,

Thanks for the explanation and update. I'm glad to know there is a solution in hand and will look forward to the HS software revision!

Jim Butcher
by JimB
Wed Jun 14, 2017 12:53 pm
Forum: ADS-B/Weather/Traffic
Topic: Stratux ADS-B Reeceiver
Replies: 40
Views: 59845

Re: Stratux ADS-B Reeceiver

Jeff, Using my Stratux with the original version of Stratux software (as described in the GRT Supplement) displaying on my Sport HS display, the Traffic Alert Filter doesn't seem to work. I have it set at 2000 ft and I see traffic that is over 6000 ft below me. I'll double check the setting, since t...
by JimB
Sun Jun 04, 2017 11:59 am
Forum: Sport WS/HS
Topic: Internal GPS problem
Replies: 9
Views: 18684

Re: Internal GPS problem

The internal GPS plugs into a board in the EFIS. You might try opening the case and reseating it.

My internal GPS sometimes works and sometimes doesn't too! I just rely on my GNS 430 GPS.

Jim Butcher
by JimB
Sat Jun 03, 2017 9:29 pm
Forum: EIS Programming
Topic: Fuel flow programming with a SDSEfi system
Replies: 1
Views: 4660

Re: Fuel flow programming with a SDSEfi system

Rob,

When GRT used Floscan senders, model 201B, the starting Flo Cal setting was 200. That transducer outputs about 32000 pulses per Gallon at 16 gph.

From this just make it proportional, maybe about 150.

Jim Butcher
by JimB
Sat Jun 03, 2017 9:11 pm
Forum: Sport WS/HS
Topic: Internal GPS problem
Replies: 9
Views: 18684

Re: Internal GPS problem

Try setting the gps on the right EFIS to GPS2. There may be a conflict with both being named GPS1. Is the serial counter on the right Efis counting? (In General Setup you should see the counter) There is a way to view whether the internal gps is "seeing" satellites. I think it is on the Di...