GRT Avionics

Edit: I meant Connector B pin 1 for the HXr warning light.

1. You need a port that can be configured for 115200 baud and output "G3X Text". Usually this means it has to be on its own port (nothing on the input), however, some things like ADS-B receivers also run at 115200 baud. If you have a 115200 ADS-B input that has no output, you could put the...

You would have to use the "Autopilot (Aviation)" output. You can use one of the SPC ports for this output but it won't be sent directly by the Safe-Fly so there's no reason to do that unless you're out of ports on the HXr. The EFIS would send the Autopilot Aviation data to the Safe-Fly and...

There is no documentation on the outputs. The only output that is clearly documented is a full or empty alarm, not a level. You can connect the alarm power output to an analog input as a simple active/inactive indication. It looks like you would have to configure it so the built-in alarm is ON when ...

0-5V signals would work with the Aux inputs on the EIS or the Analog Inputs on the HXr. For example you could wire the L2e Out 2 - Pin 6 to the HXr Analog Input 1 pin B21. Then you would configure the analog input in SET MENU, General Setup: Analog 1 Function: Aux (EIS compatible) Analog 1 Internal ...

1. You can configure an "Autopilot (NMEA0183)" or "Autopilot (Aviation)" output on any serial port. You can even share it with a different input on the same port, as long as the baud rates are the same. These Autopilot outputs will use any GPS input on the EFIS. 2. The Safe-Fly S...

It will share data while on the Power Up (ACCEPT) page so it just needs to boot up to that page.

An EFIS serial output can be programmed to output "Autopilot (NMEA0183)" data at 4800 baud or "Autopilot (Aviation)" data at 9600 baud. You can only have one of these outputs per EFIS display so if you are already using it you may need to splice wires. If you have our Safe-Fly GP...

After moving some wires around and running tests while on the phone, the CO Guardian input is working on port 4 as intended, but we don't know what fixed it. Looking at the photo, your Serial Port 7 isn't configured properly if the TT22 adapter is wired to this display. For a TT22 adapter (single or...

For the LPV and ILS final approach descent, we have supplements for the GTNs on our Miscellaneous Documentation page . They're similar to the 430Ws but they have renamed some settings. We have many 175/355/375 installs working now. We don't have full supplement documents but we have text files with ...