Rotax 912iS Sport

Post Reply
sonex293
Posts: 14
Joined: Fri Mar 15, 2013 2:10 pm

Rotax 912iS Sport

Post by sonex293 »

I am considering a Rotax 912iS Sport for a new project. I also have a GRT Sport SX and EIS6000 to use. Is there a way to interface the engine and instruments?

==
Michael
GRT_Jeff
Posts: 634
Joined: Tue Dec 11, 2012 12:11 am

Re: Rotax 912iS Sport

Post by GRT_Jeff »

Is that the one with the ECU that you have to interface to? We made a CAN bus module and modified an SX to read the ECU data for one of those engines a while back. At the time we thought there might be more like that, but so far we've only made one.
sonex293
Posts: 14
Joined: Fri Mar 15, 2013 2:10 pm

Re: Rotax 912iS Sport

Post by sonex293 »

Yes, the 912iS Sport uses a dual redundant CANaerospace Bus to communicate engine data. In this case, does the EIS get removed and a "CANbus to GRT Serial Bus" adapter get installed? or?

Can you send me more information (i.e. specs and costs)? mhcrowder@hotmail.com

Thanks!
Michael
Post Reply