Comm Remote "Flip Flop"

Post Reply
Nick
Posts: 3
Joined: Fri Mar 15, 2013 10:18 pm

Comm Remote "Flip Flop"

Post by Nick »

Is there a way to remote "Flip Flop" the Active and Standby freq. on the remote mounted Comms? I really only need one (Comm 1), but don't believe this has been implemented yet.
Nick Nafsinger
Houston, TX
RV-10, Flying
RV-8, Super Slow Build....
User avatar
Widget
Posts: 31
Joined: Thu Jan 03, 2013 2:29 am
Location: Dahlonega, GA.

Re: Comm Remote "Flip Flop"

Post by Widget »

Nick wrote:Is there a way to remote "Flip Flop" the Active and Standby freq. on the remote mounted Comms? I really only need one (Comm 1), but don't believe this has been implemented yet.
This is already included on the HXr. The SWAP softkey, right side second button down will do this.

On the right side of the box use the "softkey" next to VOL. to monitor the stby freq. When you punch that it turns from VOL to MON and shows active and standby indicators. You can toggle the monitor function of the two freq's.

Image

To get the VOL control back, repress the FREQ softkey, lower right.
Jerry "Widget" Morris
Nick
Posts: 3
Joined: Fri Mar 15, 2013 10:18 pm

Re: Comm Remote "Flip Flop"

Post by Nick »

Widget,

My fault, I wasn't clear in what I'm asking for. What I meant by Remote, is an external switch, think Button on the stick. :) Exactly like the 430 and sl30 can do now.

Thanks!
Nick Nafsinger
Houston, TX
RV-10, Flying
RV-8, Super Slow Build....
Post Reply