Login    Register
  • Author
    Message

AP won't Engage

Postby Sparky » Thu Jan 08, 2015 6:13 am

Dual HX system with GRT AutoPilot. Garmin 430/SL30. Sys is wired with a AP source select switch for either screen.
Screen 1, engages/disengages with the installed momentary button. Here is where the problem is...
Screen 2, when the source switch is selected to #2, and the Engage button is pressed shows " Engaged and disengaged within 2 seconds" I can however engage the AP via the soft buttons on screen 2..

Any Ideas?
Sparky
 
Posts: 23
Joined: Fri Nov 01, 2013 2:12 am

Re: AP won't Engage

Postby GRT_Jeff » Thu Jan 08, 2015 10:05 pm

If you are able to engage with the soft keys, then the button(s) should also work. Make sure the settings on the A/P Maintenance page are the same, especially Engage Switch Config. The settings for the autopilot do not transfer over the link, so you have to set them on all screens.
GRT_Jeff
 
Posts: 575
Joined: Tue Dec 11, 2012 12:11 am

Re: AP won't Engage

Postby Sparky » Wed Jan 14, 2015 6:51 am

Hello aged,

You were correct.. The setting on #2 was wrong..
Sparky
 
Posts: 23
Joined: Fri Nov 01, 2013 2:12 am

Return to Autopilot

Who is online

Users browsing this forum: No registered users and 2 guests

cron