Dual HX system with GRT AutoPilot. Garmin 430/SL30. Sys is wired with a AP source select switch for either screen.
Screen 1, engages/disengages with the installed momentary button. Here is where the problem is...
Screen 2, when the source switch is selected to #2, and the Engage button is pressed shows " Engaged and disengaged within 2 seconds" I can however engage the AP via the soft buttons on screen 2..
Any Ideas?
AP won't Engage
Re: AP won't Engage
If you are able to engage with the soft keys, then the button(s) should also work. Make sure the settings on the A/P Maintenance page are the same, especially Engage Switch Config. The settings for the autopilot do not transfer over the link, so you have to set them on all screens.
Re: AP won't Engage
Hello aged,
You were correct.. The setting on #2 was wrong..
You were correct.. The setting on #2 was wrong..