AP won't Engage
Posted: Thu Jan 08, 2015 6:13 am
Dual HX system with GRT AutoPilot. Garmin 430/SL30. Sys is wired with a AP source select switch for either screen.
Screen 1, engages/disengages with the installed momentary button. Here is where the problem is...
Screen 2, when the source switch is selected to #2, and the Engage button is pressed shows " Engaged and disengaged within 2 seconds" I can however engage the AP via the soft buttons on screen 2..
Any Ideas?
Screen 1, engages/disengages with the installed momentary button. Here is where the problem is...
Screen 2, when the source switch is selected to #2, and the Engage button is pressed shows " Engaged and disengaged within 2 seconds" I can however engage the AP via the soft buttons on screen 2..
Any Ideas?