Mounting the Hall Current Sensor

Post Reply
TomandJo
Posts: 1
Joined: Fri Aug 09, 2013 3:24 pm

Mounting the Hall Current Sensor

Post by TomandJo »

I have the CS-02 current sensor and I need to know how to physically mount the sensor to the firewall.
It's on the cable from the alternator to the battery but I'm not sure how to mount it.
I have coiled plastic tubing and silicone tape around the Battery cable so that it is a snug fit.
I'm thinking of just epoxying the unit to the cable, is this acceptable?

Thanks
Tom
Bobturner
Posts: 444
Joined: Mon Mar 11, 2013 6:34 pm

Re: Mounting the Hall Current Sensor

Post by Bobturner »

I used an Adel clamp.
Post Reply