GRT Horizon WS software change history

• Horizon WS 36.00 (2018-02-27)
  • Update magnetic variation data
  • Fix possible communication recovery failures with ADS-B and the Display-Unit Link
  • Fix the display of negative elevation on the airport DETAILS page
  • Fix an ADS-B input lockup when processing some ADS-B METAR data
  • Fix exit from TAF page
  • Use user-configured units in nearest lists
  • Improve the processing of servo responses when the servo software version isn't known
  • Fix the processing of incompatible and unconfigured settings when comparing limits with other displays
  • Fix missing checks for high priority Analog Aux alarms for Analog Inputs 7 and 8
  • Add notices about uncalibrated pitch servo trim
  • Add support for Adaptive AHRS
  • Fix incorrect TAS correction from True Airspeed Corrections table in some cases
  • Fix duplicate text in GPS Status page
  • Reset GPS HOLD mode when an internal direct-to is set or reset
  • Use time updates from GPS that isn't being used for navigation
  • Add Low MFS setting for weak magnetic fields in southern Africa
  • Fix use of landing threshold and displaced threshold elevation in SAP from some data sources
  • Fix reading negative cabin pressure from CO Guardian
  • Shorten glideslope capture delay to 1 second for GPSV mode
  • Send GPS altitude over the display link
  • Update processing of advanced GPS inputs for "Autopilot (NMEA0183)" serial output
  • Add GPGGA to "Autopilot (NMEA0183)" serial output
  • Improve output rate of "Autopilot" serial output
  • Fix use of pressure altitude received through GPS as GPS altitude
  • Add APGPS NMEA0183 Passthru setting for devices that can't handle advanced GPS format changes
  • Fix position of obstacles on map in SLEW mode
  • Fix heading in instructions for doing 180 during true airspeed calibration with single AHRS
  • Make both knobs work on frequency selection pages
  • Fix selected knob when returning from frequency selection pages
  • Fix matching of waypoints to displayed navaids and fixes on map
  • Fix servo status displayed for servo not controlled by the display unit
  • Accept more than 12 satellites from NMEA0183 GPS
  • Mark Garmin test GPS data as flagged
  • Mark Avidyne test GPS data as flagged
  • Add 440, 540, and 550 EXT button labels for Avidyne IFD units
  • Update ADS-B weather and traffic processing to handle newer receivers, ownship filtering, and TFR's

• Horizon WS 35i (2015-02-25)
  • Increase upper limit of Fuel Flow MAX FUEL setting
  • Fix line width on ADS-B no-data radar boxes
  • Fix full screen MAP airspeed and altimeter tapes being reconstructed on every update
  • Fix software fault with incomplete AIRMET transfer
  • Fix desired track in "Autopilot (Aviation)" output
  • Don't show no-data boxes from ADS-B if also showing a valid XM WX radar
  • Fix bad identifier lookups when adding new identifiers with the User Database function
  • Include new identifiers from User Database function in identifier searches
  • Fix processing of validity flags in Aviation GPS format
  • Fix airspace highlighting on NORTH-UP map view
  • Improve handling of changes in menu options when settings are changed
  • Fix visibility of Life Guardian settings without a Life Guardian model
  • Fix lateral LPV2 indicator
  • Add baroset output option for ARINC
  • Save the background PFD setting on the FLIGHT PLAN page
  • Fix delay in updating map cursor selections after changing range
  • Fix a software fault on the flight plan page when deleting some waypoints and then adding several more
  • Fix highlight of destination waypoint of internal flight plan when it's not in the database
  • Fix accelerated increment with Logbook edit knob
  • Show uncorrected probe value on Fuel Data Scale page
  • Add 230400 to list of serial rates to work with serial ADS-B receivers (high speed ports only)
  • Capture glideslope immediately if user selects VNAV
  • Improve glideslope capture criteria
  • Add "hr" label to hourmeter
  • Sequence the internal flight plan when crossing the bisector between courses
  • Autopilot Control Profile updates:
    • Rename Standard to Other Autopilot for non-GRT autopilots
    • Rename Enhanced to GRT Servo Standard for use with GRT servos
    • Add new GRT Servo Enhanced option for additional improvements with GRT servos
  • Show LOC-HDG when the localizer is invalid and the last heading is being held
  • Show VOR-CRS when the VOR data is invalid and a straight course is being tracked
  • Optionally require EXECUTE button push to start approach capture after arming an approach mode (SAP or ARM)
  • Change normal Restricted airspace color to bright red
  • Change other airspace colors a little to match sectionals
  • Always use boldest lines for yellow airspace alert
  • Add a timeout to the RNG function on the left knob on MAP pages
  • Add bar graph for Fuel Remaining from Fuel Flow
  • Make bar graphs in the bottom engine strip configurable
  • Enable SHOW METARS mode on all map pages
  • Hide most extra databases in SHOW METARS mode
  • Show alternate METAR/TAF range/bearing from selected airport and add configurable search limit
  • Show full user Aux name when showing alarm abbreviation
  • Add minimum voltage setting for analog dimmer input
  • Only show WIND functions for supported inputs (XM WX)
  • Allow the Jeppesen database to load into the whole EFIS as a system
  • Fix selected altitude starting in 10's mode in A/P engage menu
  • Fix regular menu appearing after selecting SAP runway
  • Change old GOTO menu labels to direct-to symbols
  • Wait 20 seconds before detecting transition out of in-flight mode based on speed
  • Add button to limit alarms to only Oil Pressure and Fuel Pressure
  • Don't reset alarm inhibits on transition to in-flight
  • Send VP-X Pro/Sport configuration over the display-unit link
  • Show compass ring on the NORTH UP map
  • Show tapes on NORTH UP map if enabled
  • Add more serial noise filtering for servos
  • Add individual TIT bar graphs and option to not show TIT bars with EGT bars
  • Fix user waypoint editor deleting edited waypoint
  • Fix user waypoint editor not allowing ID of relative waypoint to be changed
  • Fix rounding errors when loading user waypoint coordinates into editor
  • Show all User Waypoints on map within range limit setting
  • Show a black symbol in SHOW METARS mode when the airport doesn't have a METAR
  • Fix minor METAR symbol size and color issues
  • Fix automatic ILS inbound course when using SL30 OBS control and "When Selected" OBS output
  • Fix inconsistent selected course displays and controls with respect to "Show GPS on Loc/GS" setting
  • Improve movement of the heading tape for small changes in heading
  • Fix the widths of the airspeed and altimeter tapes on the MAP pages
  • Prevent A/P LEVEL mode from changing the selected altitude if another screen's mode isn't LEVEL
  • Fix flight plan timeouts with GPS units that don't send the RTE sentence frequently
  • Fix the positioning of some graphics immediately above knob menus
  • Fix weather/terrain status text covered by tapes on NORTH UP page
  • Add support for new GPS/GNSS module
  • Fix MSG button showing on pages that don't display alarms
  • Fix heading average and rounding during TAS calibration
  • Ignore extremely high fuel quantity from EIS
  • Add setting to always ignore fuel quantity from EIS