GRT Avionics

I was flying the RNAV approach to KREG the other day and just before FAF, "GPS Configuration Loss" popped up on the top of the EFIS. First time I have seen this. If someone can explain would greatly appreciate. I turned off the AP, had the Flight Director up and was in VFR so I just went a...

Thanks Bob, will try the GNAV and see what happens. Makes sense since EFIS only makes switch
when execute is hit.

I need some help figuring out how to use the 3 above. I have figured out how to load approach in the 650, arm the autopilot and fly the RNAV approach. What I can't get to work is when I load and activate a hold at the IAF. The 650 suspends the approach when a hold is activated. At this point do I st...

Thanks Jeff but I asked the question ass backwards. If I climb to say 6K and then lean to 50 LOP and then decide to climb to say 7K. If I don't touch the mixture, as I climb the engine will go richer due to the air getting thinner. The -50 of say #4 should start to go toward backwards toward peak as...

Getting around to learning how to use the Lean program. So if I climb to 7K and start the lean function and lean to something LOP. Now I decide to climb to 10K, when I get there do I need to turn off the program and start again or just leave it running during the climb to 10K? Thanks for any help. B...

I have the HXr and the HX with the two, single module, AHARs.
I was told, by someone at GRT don't remember who, to always use the dual AHRSs setting
for each screen. We were in a hurry and I didn't get a reason.
Can someone explain, sure would appreciate learning a little more.

Thanks
Bert

Are you talking about the little circle that shows
where nose is pointing? I am not using it.

Bert

On the PFD my pitch ladder has 2 degree divisions only below the horizon line. Above the horizon line, I have a 5 degree and a 10 degree. Is there some way to put the 2 degree divisions above horizon line? Working on instrument ticket, and would be nice to fine tune a steady climb rate. Any help gre...

Jeff, if I could get just a bit more info. What does the 10" HXr draw in amps when up and running? What does the AHRS draw in amps when up and running? Reason, I have the HXr and #1 AHRS on the backup battery buss. With the new battery I am considering adding my second comm to the buss. Thanks ...

Thanks Jeff, sure appreciate the help.
Bert