Search found 676 matches

by GRT_Jeff
Wed Dec 02, 2020 2:45 am
Forum: Horizon 10.1/Sport 10.1
Topic: USB Ports
Replies: 1
Views: 684

Re: USB Ports

It looks like sections 3.3.11 through 3.5 were copied from the EX manual and then not edited. Every 10.1 has two separate general-purpose USB ports, so a hub is rarely necessary. The top port can do USB 3.0 and the bottom port is USB 2.0. I've had at least one USB drive function poorly in the 3.0 po...
by GRT_Jeff
Wed Dec 02, 2020 2:28 am
Forum: Horizon 10.1/Sport 10.1
Topic: Remote Radio Control
Replies: 1
Views: 438

Re: Remote Radio Control

I responded to your e-mails about this already but I will comment here for anyone else. Radios controlled by SL30 or SL40 protocols are automatically configured for sending frequencies once the serial port is configured for SL30-1 or -2 or SL40-1 or -2. The "COM1 Device" and "COM2 Dev...
by GRT_Jeff
Wed Dec 02, 2020 2:17 am
Forum: Horizon HXr
Topic: Max USB Drive Size?
Replies: 2
Views: 899

Re: Max USB Drive Size?

The HXr/HX/SX/EX/Mini/10.1 models will read very large drives. I don't know if there is a limit but it's probably at least 2 TB. The important part is the format. They only have drivers to read and write to the common FAT32 format. The new exFAT format will not work and some drives 64 GB or larger m...
by GRT_Jeff
Wed Dec 02, 2020 2:06 am
Forum: Sport EX/Horizon EX
Topic: FLying OBS course without additional VOR radio?
Replies: 4
Views: 965

Re: FLying OBS course without additional VOR radio?

This is called GPS HOLD mode. From a full map page, push the right knob, then push Next, and then you should see a "GPS SEQ" button. Change it to HOLD. Then you can use the course knob (right knob) to dial in a course to (and from) the active waypoint. If it's a multi-waypoint plan, the EF...
by GRT_Jeff
Sat Nov 14, 2020 4:20 am
Forum: Sport WS/HS
Topic: Display Question
Replies: 7
Views: 1514

Re: Display Question

The CDI button should cause the EFIS to switch between a "GPS" indication and a "VOR" or "LOC" indication on the screen. The "NAV MODE" button will not change from "430" because both modes are part of the 430. The 430 doesn't send procedure turn and ...
by GRT_Jeff
Thu Nov 12, 2020 7:52 am
Forum: Horizon HXr
Topic: Magnetometer shuts of with AHRS1 power - Dual AHRS
Replies: 2
Views: 713

Re: Magnetometer shuts of with AHRS1 power - Dual AHRS

Yes. On the Dual Adaptive AHRS, the magnetometer and air data are powered by the AHRS1 power connections.
by GRT_Jeff
Tue Nov 10, 2020 8:25 am
Forum: Sport WS/HS
Topic: Display Question
Replies: 7
Views: 1514

Re: Display Question

If none of the indicators change, then it could be SET MENU, General Setup, NAV Mode Source. That should be External to follow the 430 mode. The 430 flight plan data doesn't include procedure details like holding patterns or procedure turns. It only sends the waypoints. GNAV mode can use the lateral...
by GRT_Jeff
Fri Nov 06, 2020 8:22 am
Forum: Horizon 10.1/Sport 10.1
Topic: TRIG TT22 GPS input
Replies: 3
Views: 847

Re: TRIG TT22 GPS input

Either way is good. The 38400 NN33 output is the old default. Newer units don't ship configured that way. If you have the control interface connected to your Horizon 10.1 then the EFIS will automatically reconfigure the Safe-Fly to the old defaults as soon as they start talking since we haven't chan...
by GRT_Jeff
Tue Nov 03, 2020 7:03 am
Forum: Horizon 10.1/Sport 10.1
Topic: TRIG Power On
Replies: 1
Views: 475

Re: TRIG Power On

Yes. That way it will always turn on when power is applied. Then it will wait for the EFIS commands to tell it what mode to be in.
by GRT_Jeff
Thu Oct 29, 2020 4:40 am
Forum: Horizon 10.1/Sport 10.1
Topic: Horizon 10.1 install
Replies: 14
Views: 3355

Re: Horizon 10.1 install

Can the SafeFly module be configured to output 9600 baud Aviation/Map signal? The EFIS can send out Aviation format through a Safe-Fly port by configuring the port as "Autopilot (Aviation)", assuming the Safe-Fly control interface is active. The Safe-Fly can't send out Aviation data by it...