GRT Discovery ADS-B software change history

There are 3 ways to update the receiver. In any case, after the update transfer completes the receiver will reboot a couple times.

1. Save the update to a USB drive and connect the drive to the full size USB port on the receiver. Monitor the EFIS or WiFi web interface to see when it completes. Most updates finish in less than 5 minutes.
2. or use a web browser to load the update file through the System Update function in the Settings page of the receiver WiFi web interface.
3. or save the update to a USB drive, connect the drive to an EFIS with full Discovery ADS-B interface, and load the update through SET MENU, Display Unit Maintenance, ADS-B Status, Update GRT Software. This can take 10 minutes or more.

• Discovery 1.02-fix-wifi (2022-04-27)
  • Fix WiFi function after changing WiFi settings in web interface. This update doesn't change the version number.

• Discovery 1.02 (2021-12-17)
  • Fix serial output overload with lots of traffic or uplink data
  • Fix frame length when relaying traffic messages
  • Add extra checks for sensor data that has never been received
  • Round altitude in ownship report
  • Add vertical speed to ownship report
  • Prefer sensor data in ownship report
  • Fix cleaning of call signs for traffic reports
  • Add airspeed from EFIS to AHRS message
  • Use magnetic heading from EFIS in AHRS message

• Discovery 1.01 (2021-08-16)
  • First complete release
  • Updated product identification

• Discovery 1.00 (2021-02-25)
  • First version