GRT Avionics

Does the HXr support installing a master caution and/or master warning light? Is it cancellable via a momentary push of the light? I thought I saw a post about a warning light that blinks when connected to connector B pin 1 but the install manual doesnt reference that.

I have an HXr with the Safe-Fly/uAvionics module and a GTX-330ES transponder. I am receiving traffic fine but the ownship is also displaying and creating a traffic alarm in the HXr inset. How do I filter that ownship data in the HXr?

I connected the RS-232 input and output on the A210 radio to a serial in/out on the HXr. What settings should I use to enable control of the radio through the EFIS? Will the EFIS also feed a GPS string to the radio?

Thanks

Dale

I recently changed the EIS from a 6000 to the R66 and have noticed that the OAT stays at 68 deg even though the temperature is significantly different. The value does not vary throughout the day. The sensor is the OAT 3 sensor type connected to pin 22 of connector A. Does this suggest a faulty probe ...

I noticed that a checklist accept is an option for an aux input. What is the input expecting to see to make this work? Ground or a voltage?

Thanks Dale

Just got a 122000 on Ebay for $55. In thinking about mounting locations, if it's looking through the propeller arc, I'm likely to see the propeller blur or those weird bendy prop blade artifacts correct? Better to mount to the wingtip or in the landing light bay?

Thanks

Dale

My oil temp reads 59 deg and doesnt move. The troubleshooting guide says that this indicates an open circuit or perhaps the sensor is not compatible with the EIS unit. I have the two wire sensor but changed from the EIS 6000 to the R66. I think this means that the two wire sensor is no longer ...

I see mention of selecting the traditional 6 pack view in the user manual but don’t see how to select it. How do I select it?

I'm still having issues with the magnetometer orientation. I also get errors for the serial ports connected to the AHRS 1 and AHRS 2 serial out on the HXr display so I wonder if both of these issues have something to do with baud rate or perhaps the magnetometer is bad (I bought it used). I have the ...

How long should the orientation process take to complete for a digital magnetometer? I'm 15 minutes into it currently with no changes to the "in progress" status.

Dale
RV-14 Build