EGT/CHT inputs for 6 cylinders, 6 Aux inputs, fuel flow capable (requires sensor) and internal Manifold Pressure Sensor.
Includes wiring harness.
$1,140.00
Remote version of EIS. Requires connection to any GRT Avionics EFIS.
EGT/CHT inputs for 6 cylinders, 6 Aux inputs, fuel flow capable (requires sensor) and internal Manifold Pressure Sensor.
Includes wiring harness.
$1,140.00
Remote version of EIS. Requires connection to any GRT Avionics EFIS.
Important Note About EIS Warning Lights: We have recently starting shipping LED warning lights with attached wires. The violet warning light wire is no longer present in EIS wiring harnesses, as shown in our wiring diagrams. The new LED warning lights have a D-sub terminal pin already attached to one of the wires. This pin can be snapped into the D-sub connector, pin 7. The other wire must be connected to +12V power. We will be updating the wiring diagrams at a future date.
Pressure (Fuel, Oil, Coolant, Hydraulic) | ||
---|---|---|
LPS-02 (0-28psi) VDO Pressure Sender | A1 | 1/10/2014 |
HPS-01 (0-150psi) and HPS-02 (0-80psi) VDO Pressure Senders | – | |
HPS-SS-01 (0-100psi) Pressure Sender | – | |
Fuel Flow | ||
FF-EI FT-60 “Red Cube” Fuel Fow Sensor | – | |
FloScan Fuel Flow Sensor | – | |
Fuel Level | ||
Princeton Capacitive Fuel Probe Calibration | ||
Fuel Probe Scale Factor and Offset Calculator | ||
Manifold Pressure | ||
MAP-01 and MAP-02 Manifold Pressure Sensors | – | |
Current | ||
CS-01 100A Current Sensor | E | 7/15/2021 |
CS-02 50A Current Sensor | – | |
Outside Air Temperature | ||
OAT Probe Installation | – | |
Fluid temperature (via Aux) | ||
FT-1827-02 Fluid Temperature (via Aux) | A | 9/24/2013 |
Voltage (via Aux) | ||
Voltage (via Aux) | – | 8/24/2014 |